Pur Fill 1G 750 ml Can

PUR FILL low expansion foam will seal and stop the passage of air, gases, water, dust, fibers, and sound into a building. Sealing air leaks also reduces the number of places than insects can use to enter a house. PUR FILL 1G foam is a rigid, low expanding, closed-cell foam that is applied with a foam gun. One 750 ml canister (32 oz, 870 grams) will produce 2,820 cubic inches of cured foam, providing 1,200 linear feet of 1/2" bead. It is tack-free in ten minutes and trimmable in thirty minutes. Foam consumption is reduced by 25 percent when using PUR FILL 1G compared to foam dispensed directly from an aerosol valve. Note that an application gun is not provided, but may be purchased separately (see related products below).
Color: Yellowish
Expanded Foam (free rise @ 68 deg.): 1.67 cubic feet
Density: 1.2 pounds per cubic foot
Cell Structure: 80% closed
Compression Load Deflection (10% compression): 8.5 pounds per square inch
Minimum Can Temperature: 40 degrees F. (5 degrees C.)
Minimum Surface Temperature: 32 degrees F. (0 degrees C.)
Stability of Cured Foam: -40 deg. F. (-40 deg. C.) to 176 deg. F. (80 deg. C.)
Flame Spread Index (ASTM E 84): 25
Smoke Density (ASTM E 84): 210
Thermal Resistance (ASTM C 518): 6.0 per inch
Origin: Germany
Additional Information: Specification Sheet (pdf)
Additional Information: Material Safety Data Sheet (pdf)
Important Note: EFI cannot accept returns or issue credit for Pur Fill 1G.